YOUR BUYING COMPANION
Get the right fit for your setup.
Three useful checks before you order. Work through them at your own pace.
01Check the fit and intended use
Follow the film manufacturer’s directions. Test surface compatibility, inspect for grit and use controlled pressure; scratch-free results are not guaranteed.
02Choose the right configuration
Review the pack, color and other options. The selected configuration and price identify what goes in your cart; the photograph does not establish pack quantity.
03Plan the first use
Read the setup and care guidance below. For a larger supply order, check one item against the actual fit and intended task before distributing the rest.
Use these checkboxes to track your review. Confirm the selected contents and any fitting or care requirements before ordering.
WHAT IT IS · HOW IT WORKS
Control the pressure. Work the film evenly.
Apply compatible adhesive film with four blue plastic squeegees featuring a black felt-covered edge. Each tool is approximately 100 × 72 × 7 mm, about four inches across. Use controlled overlapping strokes and follow the film manufacturer’s preparation and application directions. Test contact on a discreet area before working on a visible finish.
Four application tools
The selected offer is a four-pack. The enlarged product image shows the shape of one blue tool and its black felt edge.
Felt-covered contact edge
The felt edge provides a covered contact surface for suitable film applications. Keep it clean: trapped grit or a worn edge can still mark a finish.
Compact rigid body
The approximately four-inch width gives a handheld surface for short, controlled passes. It is not a powered tool or a guarantee against application bubbles.
WHAT YOU RECEIVE
Four application tools
The selected offer is a four-pack. The enlarged product image shows the shape of one blue tool and its black felt edge.
GET SET UP
How to use it.
- 1
Prepare the material
Follow the adhesive-film maker’s instructions and check whether wet or dry application is required.
- 2
Inspect the edge
Remove grit and check that the felt is clean, attached and free from damage.
- 3
Work in controlled passes
Use the appropriate angle and pressure, moving gradually to guide air or application fluid toward an edge as the film directions permit.
- 4
Clean and store
Clean using a method suitable for the tool and film. Let the felt dry and replace a damaged edge or tool.
A GOOD FIT FOR
Applying suitable adhesive film
Follow the film manufacturer’s directions. Test surface compatibility, inspect for grit and use controlled pressure; scratch-free results are not guaranteed.
Get help with a larger order →PRODUCT FACTS
- Included
- 4 blue plastic application squeegees with felt edges
- Approximate size
- 100 × 72 × 7 mm each
- Contact edge
- Black felt covering
- Power
- Manual
- Use
- Applying suitable adhesive film
BEFORE YOU ORDER
Useful answers.
How many tools are included?
Four blue plastic felt-edge squeegees. Quantity two supplies eight tools.
What are the dimensions?
The source lists approximately 100 × 72 × 7 mm, or 3.94 × 2.83 × 0.28 inches per tool.
Is adhesive vinyl included?
No. Film, cleaner and other installation materials are not included.
Is it guaranteed not to scratch?
No. Inspect and clean the edge, use suitable pressure and test the particular finish first.
Can it be used on every surface?
No. Compatibility depends on the film, finish, cleaning method and instructions for the application.